Page 1 of 1

today at work

PostPosted: Thu Oct 10, 2013 10:24 pm
by Jeffast
IMG_20131010_151823[1].jpg
so this was my project for the day at work, who can guess the repair, or how many hours this is supposed to take, no i am not replacing the engine or transmission

Re: today at work

PostPosted: Fri Oct 11, 2013 4:12 pm
by subeman90
clutch job. $5k (my guesses)

Re: today at work

PostPosted: Fri Oct 11, 2013 9:47 pm
by Jeffast
subeman90 wrote:clutch job. $5k (my guesses)

not separating the engine or transmission, it was just easier to pull them as a unit(also its an automatic)

Re: today at work

PostPosted: Sat Oct 12, 2013 10:58 am
by subeman90
oh man I am stumped. You might just be the cure to me ever wanting to have an Audi.

Re: today at work

PostPosted: Sat Oct 12, 2013 9:05 pm
by rpholz
Timing belt, 8-10hrs, 4-6k

Re: today at work

PostPosted: Sun Oct 13, 2013 12:53 am
by Jeffast
rpholz wrote:Timing belt, 8-10hrs, 4-6k

nope, to do a timing belt you just take the front end of the car off, takes like 30 min

Re: today at work

PostPosted: Tue Oct 15, 2013 12:24 am
by Caboobaroo
Head gaskets?

Re: today at work

PostPosted: Tue Oct 15, 2013 8:46 am
by rpholz
Wiper blades

Re: today at work

PostPosted: Tue Oct 15, 2013 7:45 pm
by Jeffast
oil cooler gasket, its visiable just below the number one exhaust port on the head its behind the oil filter houseing which is the black circle under the header, and 23.5 hrs

Re: today at work

PostPosted: Tue Oct 15, 2013 8:09 pm
by subeman90
Jeffast wrote:oil cooler gasket, its visiable just below the number one exhaust port on the head its behind the oil filter houseing which is the black circle under the header, and 23.5 hrs

and the cost is???????????????

Re: today at work

PostPosted: Tue Oct 15, 2013 10:33 pm
by Jeffast
subeman90 wrote:
Jeffast wrote:oil cooler gasket, its visiable just below the number one exhaust port on the head its behind the oil filter houseing which is the black circle under the header, and 23.5 hrs

and the cost is???????????????

i think it was around 4k

Re: today at work

PostPosted: Wed Oct 23, 2013 1:32 am
by austinXT6
Image